What should I pay attention to when installing seals?

1. Do not damage the sealing surface or sealing line of the hydraulic sealing surface
The sealing performance of the hydraulic seal depends on the upper and lower end faces. The sealing performance of a hydraulic seal depends on the connecting line of the hole or shaft. The parts are made of soft, high-temperature, corrosion-resistant, and aging-resistant materials. Vulnerable special materials made of graphite, rubber, plastic and fiber. Special protection and maintenance are required during handling installation and storage. Under normal circumstances, once damaged, the sealing part will leave a great hidden danger.

2. Do not install seals forcibly
Some sealing devices are mounted on a grooved sealing device. A tight installation is required. The installation process must not be shoddy. Forced installation will destroy the original prefabricated structure of the sealing ring, just like destroying precast concrete. The necessary content will inevitably lead to a disaster. This seal must be installed very carefully and must be embedded step by step.

3. Pay attention to the balance and symmetry of the seal when installing
Put the sealing ring near the effective sealing surface (or lip line). After opening and using the system, further observation and tightening of the seal later maintenance work is required to prevent changes (such as pressurization) caused by changes in operating conditions during operation of the system. The resulting micro-leakage leads to system damage.