News

Skeleton Oil Seal package with precautions First, receive a fixed number of seals. Second, from the oil seal to the assembly, must be kept clean....

1, O-ring overheat If the O-ring is overheated, check the seal of the centrifugal pump and its cooling device as soon as possible. This inspection...

O-ring, star-shaped ring, O-ring coated O-ring is mainly used for static gap sealing of fluid (such as water, oil, air, chemical solvents, chemica...

1.The ordinary rubber ball is the use of natural rubber for the screening of the general material on the vibrating screen. 2.silicone rubber ball ...

1. the reason of assembly （1） the deformation of the oil seal was caused by pressure loading. （2）During the assembly process, the oil seal passes...

1. If the damage is installed, some or all of the seals are neatly wound. Cause: 1. grooves and other parts are sharp wingers 2. groove design is...

First: groove size: O ring is installed in the groove, in order to be able to play the best sealing effect, we should set an initial preload. The ...

The Y-shaped seal ring is a typical lip-shaped seal ring. According to its cross-section of high and wide ratio, can be divided into broad, narrow...

The sealing ring is mainly applied to the conveying pipe of concrete pump truck, which plays a sealing role.

O-rings are affected by external environmental factors such as distortion, oxygen, ozone, light, heat, humidity, oil, or chemical solvents, and O-r...