When some people use the rubber sealing ring, they have encountered the cracking and hardening of the sealing ring. What is the reason for the aging of the material of the rubber sealing ring products? The aging of rubber sealing rings will cause some sealing rings to lose sealing effect.
The rubber seal ring is made of rubber material. What is the reason for the aging of the material of the rubber seal ring products? In the production process of rubber sealing ring, due to the comprehensive effect of internal and external factors, the physical and chemical properties and mechanical properties of rubber gradually deteriorate, resulting in the loss of use value. This change is called rubber aging. Haisheng seals tell you that the surface is cracked, sticky, hardened, softened, powdered, discolored, moldy, etc. There are the following factors.
A. Heat: the increase of temperature leads to the cracking of the rubber material of the sealing ring, producing chemical oxidation reaction and accelerating the rubber oxidation reaction speed;
B. Light: the shorter the light wave, the greater the energy. The ultraviolet ray with high energy can destroy the rubber sealing ring. In addition to the direct breaking and crosslinking of the rubber molecular chain caused by ultraviolet light, the rubber of the rubber seal ring generates free radicals due to the absorption of light energy, which triggers and accelerates the oxidation chain reaction process.
C. Oxygen: oxygen has free radical chain reaction with rubber molecules in the rubber, and the molecular chains are broken or over crosslinked, resulting in changes in the performance of rubber sealing rings. Oxidation is one of the important causes of rubber aging.
D. Ozone: the chemical active oxygen of ozone is much higher and more destructive. It also breaks the molecular chain, but the effect of ozone on rubber varies with whether the rubber sealing ring is deformed or not.
E. Moisture: the rubber sealing ring is easy to be damaged when wet air is exposed to rain or soaked in water. This is because the water-soluble substances in the rubber and the water-soluble groups are extracted and dissolved by water.
F. Mechanical stress: under the repeated action of mechanical stress, the molecular chain of the rubber seal ring will be broken to form free Tsuen, which will lead to oxidation chain reaction, and ozone cracking is easy to be caused under the action of stress.

